Specifications
| Model |
CFM |
PSIG |
HP |
Stages of Compression |
| BAM04 |
5.8 |
5000 |
5 |
3 |
| BAM05 |
8.6 |
5000 |
7.5 |
3 |
| BAM06 |
13.1 |
5000 |
10 |
4 |
| BAM06H |
14 |
6000 |
10 |
4 |
| BAM07 |
18.7 |
5000 |
15 |
4 |
| BAM07H |
20.7 |
6000 |
15 |
4 |
| BAM08 |
25.3 |
5000 |
20 |
4 |
| BAM08H |
27 |
6000 |
20 |
4 |
| BAM09 |
30.6 |
5000 |
25 |
4 |
| BAM09H |
33.2 |
6000 |
25 |
4 |
|
Breathing Air Module
(BAM)
The Breathing Air Module was designed
to meet the rigors and performance requirements of today's most
active fire departments. This design allows the fire department
to install the compressor cabinet up against a wall, thus saving
precious floor space. Features include the following:
· Vertical steel cabinet houses pressure
bearing
components for operator safety.
·
Cabinet incorporates sound attenuation material for
reduced noise levels.
· Five hinged maintenance
access panels. Four panels
can be removed from the cabinet without the use of
hand tools.
·
Designed to incorporate both three and four stage
compressors.
·
Time tested "V" configured, four stage compressor
incorporates piston rings on all stages for maximum
compression efficiency.
·
Single or three phase electric motor (10 hp maximum
for single phase).
·
Stainless steel control panel with 1-4 stage pressure
gauges, oil pressure gauge (4 stage models)
,hourmeter, on/off button, emergency stop button,
shutdown light package, inlet filter restriction indicator.
·
Automatic condensate drain with steel muffler /
reservoir.
·
Purification system designed to deliver
Grade "E"
breathing air.
·
Optional equipment available such as Cartridge Monitor
or Carbon Monoxide Monitor are mounted directly onto
the stainless steel operations panel.
|
